dbx Quantum User Manual

Also see for QUANTUM: User manual Manual Application guide

dbx Quantum User Manual Manual pdf 46 page image

Detailed Parameters®38Section 4 QUANTUMQUANTUM User ManualSection 4Band 1 FC 20.0 Hz to 20.0 kHzThis controls the corner frequency for the low frequency shelving EQ band.Slope 3 to 12 dB / OctaveSets the slope of the shelf.Level -12 to + 12 dBAmount of boost or cut. Adjustable in 1/2 dB steps.Band 2, 3, 4 FC 20.0 Hz to 20.0 kHzThis controls the center point for the parametric EQ.Q 0.25 to 16.0Sets the width of the boost / cut.Level -12 to + 12 dBAmount of boost or cut. Adjustable in 1/2 dB steps.Band 5 FC 20.0 Hz to 20.0 kHzThis controls the corner frequency for the high frequency shelving EQ band.Slope 3 to 12 dB / OctaveSets the slope of the shelf.Level -12 to + 12 dBAmount of boost or cut. Adjustable in 1/2 dB steps.There are three crossover points on the QUANTUM, creating 4 bands. Tuning them allows youto select which frequencies to process with which of the multiband dynamics processors. TheQUANTUM uses phase compensated, Butterworth 1st and 3rd order filters.Within the crossover menu on the QUANTUM, the following parameters are user adjustable:Edge 1 Fc 20.0 Hz to 5.0 kHzSets the crossover point between bands 1 and 2.Edge 2 Fc 40.0 Hz to 10.0 kHzSets the crossover point between bands 2 and 3.Edge 3 Fc 79.0 Hz to 20.0 kHzSets the crossover point between bands 3 and 4.Slope 6 or 18 dB / Octave (per band)Your choice of 2 different slopes for each of the 3 crossover points.4.8 XOver4.7 EQ (cont.)