deconta D Series Instruction Manual
                                               | |
Contents
| 
Instruction manualNegative Pressure Unit D-rangePage 216 Assembly instructionsThe negative pressure unit is delivered ex-works and ready for immediate operation.If there are visible damages, do not operate the device.Please contact the deconta GmbH at once.6.1 Assembly instructions with the example of D 610(the procedure for D 60, D 100, D 305 and D 910 is identical)Please respect:Basically the negative pressure units D 60, D 100, D 305, D 610 and D 910 can alsobe operated directly in the dirty area (over pressure technique prevent theinfiltration of the surrounding contaminated air in the housing).Because the devices are contaminated from outside and therefore need anexpensive cleaning after the end of the sanitation work, one should avoid the usein the dirty area by all means. Connect the device with the wall between clean / and sanitation area Place it about. 100 mm in the sanitation area Seal the device with the wall Conduct the exhausted air hose in the open air Provide for enough supply air in the sanitation areaClean area Contaminated areaSupply air opening withself-closing flaps |
manualsdatabase
Your AI-powered manual search engine