decrane aerospace DVD-9101-201-x Installation And Operation Manual
                          | |
Contents
| 
DeCrane Aerospace Audio International DVD-9101-201-x Installation & Operation ManualDocument # 540339, Rev B, 06/2009 Page 17 of 254.3 Supported RS-485 and IR CommandsEJECTThis button functions exactly as the front panel EJECT Button: The EJECTButton allows the user to eject the DVD. Pressing the EJECT Button will allowthe user to gently pull the DVD out of the mechanism.SETUPThe SETUP Button toggles display of the Setup Menu, which allows the user toaccess or modify various settings. Use the navigation buttons to advancethrough the available settings:GENERAL SETUP- ANGLE MARK: Can be turned on or off. When this feature is turned on, anANGLE MARK display appears on the screen for scenes that were shot atdifferent angles.- OSD LANGUAGE: Select the language that the OSD setup screens aredisplayed in.SPEAKER SETUP- DOWNMIX: Selects the DOWNMIX of the audio outputs. The followingsettings are available:Lt / Rt – Switch downmix to 4 channel output.Stereo – Switch downmix to 2 channel output.Off – Disable downmix.- CENTER: Turn CENTER SPEAKER on/off- REAR: Turn REAR SPEAKERS on/off- SUBWOOFER: Turn SUBWOOFER on/off- CENTER DELAY: Adjust the speaker’s CENTER DELAY.- REAR DELAY: Adjust the speaker’s REAR DELAY.- BASS: Turn BASS BOAST on/off.AUDIO SETUP- OP MODE: Sets audio compression level.LINE OUT – Normal audio compression. Allows scaling of compression.RF REMOD – Heavy COMPRESSION Setting. No scaling allowed.- COMPRESSION: Sets the COMPRESSION Level when in LINE OUT OPMode.- PRO LOGIC: Enables / disables PRO LOGIC Mode.PLAY MODE SELECTION- SHUFFLE: Turns SHUFFLE Mode on/off.- REPEAT: Turns REPEAT Mode on/off.- SCAN: Turns SCAN Mode on/off. |
Related manuals for decrane aerospace DVD-9101-201 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine