decrane aerospace DVD-9101-201-x Installation And Operation Manual
Also see for DVD-9101-201-x: Installation and operation manual
                         | |
Contents
| 
DeCrane Aerospace Audio International DVD-9101-201-x Installation & Operation ManualDocument # 540339, Rev A, 02/2008 Page 17 of 24 The user can enter SLOW FORWARD Mode by pressing the FORWARDButton. (Not a front panel option. This function is accessible by remotes anddata bus connected devices only) The user can Step through the video by repeatedly pressing the PAUSEButton. Normal playback can be resumed by pressing the PLAY Button.DVD Audio/Audio CD/MP3 CD:Press the PAUSE Button once to place the DVD Player in PAUSEMode.Normal playback can be resumed by pressing either the PAUSEButton or the PLAY Button.STOP BUTTONPress the STOP Button during playback to place the DVD Player in HOLD Mode.Pressing the PLAY Button at this point will resume playback from the held point.In lieu of remote or RS-485 commands, the user can press and hold the STOPButton for approximately five (5) seconds to access the DVD Player’s SetupMenu.4.3 Supported RS-485 and IR CommandsEJECTThis button functions exactly as the front panel EJECT Button: The EJECT Buttonallows the user to eject the DVD. Pressing the EJECT Button will allow the user togently pull the DVD out of the mechanism.SETUPThe SETUP Button toggles display of the Setup Menu, which allows the user to accessor modify various settings. Use the navigation buttons to advance through the availablesettings:GENERAL SETUP- ANGLE MARK: Can be turned on or off. When this feature is turned on, anANGLE MARK display appears on the screen for scenes that were shot atdifferent angles.- OSD LANGUAGE: Select the language that the OSD setup screens aredisplayed in. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine