decrane aerospace LCDP-9084-301-x Installation And Operation Manual

Contents

decrane aerospace LCDP-9084-301-x Installation And Operation Manual Manual pdf 7 page image

DeCrane Aerospace Audio International, Inc. LCDP-9084-301-x Installation ManualDocument # 540344, Rev A1, 02/2009 Page 6 of 16Installation3.1 Prior to installation, the following items should be considered:3.1.1 During the design and layout of the aircraft cabin, carefulconsideration of the location of this module is necessary. Some ofthe items to be considered include:• Space• Available power supply• Environmental conditions (temperature, humidity, etc.)• Length of cable runs3.1.2 The LCDP-9084-301-x shall be installed to conform to thestandards designated by the customer, installing agency, andexisting conditions as to the unit location and type of installation.3.1.3 Mounting is accomplished by insertion of the 9G Plug-In Arm intoBSE-9101-101-x Plug-in Monitor Base. Refer to Section 8.0,Reference Drawings, for mounting hole diameters andconfiguration. (This product has the ability to meet or exceed all ofthe industry’s expectations and there is no need for it to be stowedduring take-off or landing.)3.1.4 Locate the monitor as close to the source equipment as possible inorder to reduce the possibility of noise introduced into the video.Refer to Section 7.0 for unit dimensions.3.2 Unpacking and Inspection3.2.1 Carefully open the packaging and remove the LCDP-9084-301-x.Verify that all components have been included in the package perthe packing list. Inspect the unit for damage. Retain the packingmaterials and packing list.3.2.2 If damage has occurred during shipping, a claim should be filedwith DeCrane Aerospace Audio International WITHIN 24 hours anda Return Request Authorization Number shall be obtained fromDAAI by contacting the Repair Department at 501.801.8101.Repackage the unit in its original packaging materials and return itto DAAI following instructions given by the DAAI representative.Refer to the front cover of this manual for address. If no return isnecessary, retain the packing list and the packing materials forstorage.