decrane aerospace LCDP-9151-201 Installation Manual

Contents

decrane aerospace LCDP-9151-201 Installation Manual Manual pdf 8 page image

DeCrane Aerospace Audio International LCDP-9151-201 Installation ManualDocument # 540355, IR, 11/2007 Page 7 of 163.0 Installation3.1 Preparation3.1.1 During the design and layout of the aircraft cabin, carefulconsideration of the location of this module is necessary. Some ofthe items to be considered include:• Space• Available power supply• Environmental conditions (temperature, humidity, etc.)• Length of cable runs3.1.2 The LCDP-9151-201 shall be installed to conform to the standardsdesignated by the customer, installing agency, and existingconditions as to the unit location and type of installation.3.1.3 Mounting is accomplished by insertion of the Plug-In arm intoBSE-9101-201-x Plug-In Monitor Base. Refer to Section 7.0,Reference Drawings, for mounting hole diameters andconfiguration.3.1.4 Locate the monitor as close to the source equipment as possible inorder to reduce the possibility of noise introduced into the video.Refer to Section 6.0 for unit dimensions.3.2 Unpacking and Inspection3.2.1 Carefully open the packaging and remove the LCDP-9151-201.Verify that all components have been included in the package perthe packing list. Inspect the unit for damage. Retain the packingmaterials and packing list.3.2.2 If damage has occurred during shipping, a claim should be filedwith DeCrane Aerospace Audio International WITHIN 24 hours anda Return Request Authorization Number shall be obtained fromDeCrane Aerospace Audio International by contacting the RepairDepartment at 501.801.8101. Repackage the unit in its originalpackaging materials and return it to DeCrane Aerospace AudioInternational following instructions given by the DeCraneAerospace Audio International representative. Refer to the frontcover of this manual for address. If no return is necessary, retainthe packing list and the packing materials for storage.