ebm-papst 4412 FM Operating Manual

page 2 of 5Electrical voltage and currentDANGERElectrical voltageRegularly check the electricalequipment of the product.Ø Eliminate immediately looseconnections and defective cables.Safety and protective functionsDANGERMissing safety device and faultyprotective equipment.Without protective equipment severeinjuries can occur, e.g. by taking hold ofthe rotating equipment.Ø Operate the product with protectionguards only.Electromagnetic radiationElectromagnetic compatibility (EMC) may affect the system integrationof the product due to interaction.Ø Ensure the electromagnetic compatibility of the entire system.Moving partsDANGERSelf-starting productIf voltage is applied, the motorautomatically restarts after a mainsfailure or when blocking has beeneliminated.Ø Do not stand in the danger zone ofthe product.Ø Switch off the mains voltage whenworking on the product and secureagainst switching on again.WARNINGRotating fanLong hair, loose-fitting garments andjewellery can be caught and pulled intothe product. Risk of injury.Ø Do not wear loose-fitting garmentsor jewellery when working onmoving parts.Ø Protect long hair by wearing a hairnet.CAUTIONHigh risk of fire spreadingCan cause fire to spread.Ø Never direct the airflow(intake/exhaust side) at a potentialsource of fire.Hot surfaceCAUTIONHigh temperature at motor housing.Risk of burnsØ Provide adequate protection againstaccidental contact.TransportOnly transport the product in its original packaging. Secure duringtransport.The vibration values, temperature and climate ranges should not beexceeded during transport.StorageStore the product in a dry and clean environment that is well protected.Ensure that the storage temperature is adhered to,see Chapter 3,Technical Data.If the product is not operated for a longer period oftime, we recommend running it for approx. 15 minutes annually tomove the motor bearings.CleaningNOTEProduct damaged during cleaningØ Clean the product carefully with amoist cloth without applyingpressure to the rotor. Do not usecleaning agents that contain acids,caustic solutions or solvents.DisposalWhen disposing of the product, observe all requirements andregulations that are relevant in your country.2 INTENDED USEThe product is designed exclusively as a built-in device for conveyingair according to the technical data.Every use that is not in accordance with the intended purpose, isregarded as misuse of the product.On-site installations must comply with the mechanical, thermal andservice life requirements, see Chapter 3, Technical Data.Intended use includes:- Operating the product with all protective equipment- Do not put the product into operation before it has been installed inthe customer's application- Observation of the operating manualUse for other than the intended purposeUsing the product for the purposes mentioned below is prohibited andcan be dangerous:- Conveyance of air that contains abrasive particles.- Conveyance of air that has a highly corrosive effect.- Conveyance of air that has a high dust load, e.g. vacuumingsawdust.- Conveyance of inflammable gases/particles.- Contact with materials that can damage the product, e.g. acids,caustic solutions, solvents.- Exposure to radiation that can damage product components, e.g.strong UV rays or thermal radiation.- Operating during external vibration.- Operating the product close to inflammable materials orcomponents.- Operating the product in an explosive atmosphere- Use of the prouct as a safety component or for performing safety-relevant functions.- Operating in medical devices with life-sustaining or life-savingfunction.- Operating in non-stationary systems, e.g. railway vehicles, aircraftand spacecraft.- Operating with fully or partially dismantled or manipulated protectiveequipment.- Operating the product under conditions other than those mentionedin the technical data.- Furthermore, all fields of application not mentioned under intendeduse.An in situ assessment must be conducted of the heating behavior(appropriate and inappropriate operation), the protection againstcontact, electrical shocks, impact of foreign objects or water and theusage at altitudes higher than 2000 meters.Contact ebm-papst if you have specific queries regarding the product.

/ 5

Related manuals for ebm-papst 4412 FM