ebm-papst 4650 N Operating Instructions Manual

Also see for 4650 N: Operating manual

Contents

ebm-papst 4650 N Operating Instructions Manual Manual pdf 3 page image

page 3 of 5An in situ assessment must be conducted of the heating behavior(appropriate and inappropriate operation), the protection againstcontact, electrical shocks, impact of foreign objects or water and theusage at altitudes higher than 2000 meters.Contact ebm-papst if you have specific queries regarding the product.3 TECHNICAL DATADrawing, see annexTechnical descriptionAirflow direction Air intake over strutsRotational directionlooking at rotor clockwiseFrequency 50 Hz 60 HzNominal voltage 230,0 V 230,0 VCurrent consumption 117 mA 106 mAPower consumption 19,5 W 18,0 WNominal voltageCurrent consumptionPower consumptionSpeed 2.600 1/min 2.950 1/minMax. free-air flow 146,0 m3/h 170,0 m3/hWeight 0,550 kgProtection class IMax. torque whenmounted across bothmounting flangeswire outlet corner: 190 Ncmremaining corners: 310 NcmScrew sizeISO 4762 - M4 degreased,without an additional brace andwithout washerThe product is intended for use in sheltered rooms with controlledtemperature and controlled humidity. Directly exposure to water mustbe avoided.Pollution degree 1 (according DIN EN 60664-1)There is either no pollution or it occurs only dry, non-conductivepollution. The pollution has no negative impact.Ambient conditionsPermitted ambient temperatureTransport and storage Operation50 Hz 60 Hz-40 °C ... 80 °C -10 °C ... 55 °C -10 °C ... 60 °CVibration and shock loadAt stationary operation:sinus vibration 1,0 g; 5 - 500 Hz; 3 x 1 sweep(Resonance search run)Noise0,5 m2/s3, 10 - 50 Hz; +12dB/oct f. 5 - 10 Hz; -12 dB/oct f.50 - 100 Hz; 3 x 30 minRepetitive shock Half sine; 5 g, 11 ms; 6 x 100shocksTransport and storage:Noise 2,0 m2/s3, 5 - 20 Hz; -3 dB/oct f.20 - 500 Hz; 3 x 30 minThrusts Half sine; 18 g, 6 ms; 6 x 100shocksDo not operate your product in the resonance range.4 CONNECTION AND COMMISSIONINGConnect mechanical partsCAUTIONRisk of cutting/squashing whenremoving the product from thepackaging and during mounting.Grasp the housing and lift the productcarefully out of the packaging. Avoidimpact.Ø Wear safety boots and cut-resistantgloves.Connect electrical partsConnect to the mains after installation.DANGERDo not touch. Risk of fatal injuryfrom electrical current.Ø Ensure that the electrical lines arede-energized.Ø Secure the operating voltage againstswitching on again.Ø Never work on parts that areenergized. Only allow skilledelectricians to work on the product.DANGERCompliance with the electricalinstallation regulationsØ Observe the connection regulationsthat are valid in your country. (e.g.fusing, GFCI)CAUTIONElectrical voltageThe product is a built-incomponent and has no switch fordisconnecting power.Ø Only connect the product tocurrent circuits that can beswitched off by a switch (all polesdisconnected). When working onthe product, secure thesystem/machine in which theproduct is installed againstswitching on again.NOTEElectromagnetic compatibility (EMC) may affect the system integrationof the product due to interaction.Ø Ensure the electromagnetic compatibility of the entire system.Ground fault interrupter GFIOnly current-sensitive GFIs (type B)are permissible. Personal protection isnot possible with GFIs when theproduct is in operation (see alsofrequency converters).Requirements:- Before connecting the product, ensure that the supply voltagecorresponds with the product voltage.- Check whether the data on the nameplate corresponds with theinterface data.

/ 5

Related manuals for ebm-papst 4650 N