ebm-papst 8214JH4R Operating Manual

page 4 of 72 INTENDED USEThe product is designed exclusively as a built-in device for conveyingair according to the technical data.Every use that is not in accordance with the intended purpose, isregarded as misuse of the product.On-site installations must comply with the mechanical, thermal andservice life requirements, see Chapter 3, Technical Data.Intended use includes:- Operating the product with all protective equipment- Do not put the product into operation before it has been installed inthe customer's application- Observation of the operating manualUse for other than the intended purposeUsing the product for the purposes mentioned below is prohibited andcan be dangerous:- Conveyance of air that contains abrasive particles.- Conveyance of air that has a highly corrosive effect.- Conveyance of air that has a high dust load, e.g. vacuumingsawdust.- Conveyance of inflammable gases/particles.- Contact with materials that can damage the product, e.g. acids,caustic solutions, solvents.- Exposure to radiation that can damage product components, e.g.strong UV rays or thermal radiation.- Operating during external vibration.- Operating the product close to inflammable materials orcomponents.- Operating the product in an explosive atmosphere- Use of the prouct as a safety component or for performing safety-relevant functions.- Operating in medical devices with life-sustaining or life-savingfunction if not validated together with ebm-papst.- Operating in non-stationary systems, e.g. railway vehicles, aircraftand spacecraft if not validated together with ebm-papst.- Operating with fully or partially dismantled or manipulated protectiveequipment.- Operating the product under conditions other than those mentionedin the technical data.- Furthermore, all fields of application not mentioned under intendeduse.An in situ assessment must be conducted of the heating behavior(appropriate and inappropriate operation), the protection againstcontact, electrical shocks, impact of foreign objects or water and theusage at altitudes higher than 2000 meters.Contact ebm-papst if you have specific queries regarding the product.3 TECHNICAL DATADrawing, see annexTechnical descriptionAirflow direction Air outlet over strutsRotating direction lookingat rotor CounterclockwiseNominal voltage 24,0 VCurrent consumption 1.650 mAPower consumption 39,6 WSpeed 14.000 1/minMax. free-air flow 220,0 m3/hMass 0,210 kgProtection class IIIMax. torque whenmounted across bothmounting flangesWire outlet corner: 50 NcmRemaining corners: 110 NcmScrew sizeISO 4762 - M4 degreased,without an additional brace andwithout washerThe product is for the use in sheltered rooms with limited controlledtemperature. Occasionally condensed water is allowed. Directexposure to water must be avoided. Saline ambient conditions must beavoided.Pollution degree 2 (according DIN EN 60664-1)It occurs only non-conductive pollution. Occassionally, temporaryconductivity caused by condensation occurs.Ambient conditionsPermitted ambient temperatureTransport and storage Operation-40 °C ... 80 °C -20 °C ... 70 °CVibration and shock loadThe mechanical Vibration and Shock data for the product is available.If the operation of the product should take place in a sinusoidalvibration containing environment or fixing the product on sinusoidalvibrating surface, please contact our technical support.Do not operate your product in the resonance range.

/ 7

Related manuals for ebm-papst 8214JH4R