fafnir VISY-X Technical Documentation Manual
Also see for VISY-Density LPG: Technical documentation
                                                            | |
Contents
| 
Installation Page 28/55(1) The sensor has to stand on the floor of the jacketed pipe, cut the pipe if necessary.(2) Screw the sealed cutting ring fitting in the flange (min. DN 50) or reducer (min. 1½"),slide the jacketed pipe into the cutting ring fitting, pipe must be movable easily.(3) Plug the float with marking “TOP” upwards the probe head on the jacketed pipe andthen fix the adjusting ring. Check the adjusting ring being securely attached so that thefloat is unable to fall into the tank. Slide the float to the bottom of the jacketed pipe.The marking "TOP" on the float must point towards the probe head.(4) Connect the flange or the reducer with the process connection at the tank.(5) Press the jacketed pipe gently on the bottom of the tank, mark that position on thepipe, and fix the pipe 10 mm below the marking (safety distance).If there is no safety distance between the probe tube and the bottom of the tank,the tube could be bent and damaged by the tightening process.(6) To fix the jacketed pipe hand tighten the cutting ring fitting first and then with a 1 ¼turn clockwise (see following figure).(7) Insert the sensor VISY-Stick LPG without float into the jacketed pipe and fix it with thereducer ∅ 12 / ∅ 16 (pipe joint).(8) Configure the VISY-Command: 18 mm must be entered as an offset in VISY-Setup(safety distance 10 mm + jacketed pipe bottom 8 mm) and LPG as product.See also: Installation guide: variable LPG installation kit, art. no. 3500945.2.8 1" Installation kitThe optional 1" Installation kit (art. no. 908493 for E10, art. no. 908484 for DK, art. no. 900168for E85) allows the installation of the VISY-Stick by means of a R1 threaded sleeve. |
Related manuals for fafnir VISY-Density LPG
fafnir VISY-X Technical Documentation Manual
fafnir VISY-X Technical Documentation Manual
fafnir VISY-X Technical Documentation Manual
fafnir VISY Series Technical Documentation Manual
fafnir TORRIX Technical Documentation Manual
fafnir UM Series Technical Documentation Manual
fafnir SEPARIX-Control CT Technical Documentation Manual
This manual is suitable for:
VISY-Density LPGVISY-XVISY-CommandVISY-Reed Interstitial DryVISY-Reed Sump DispenserVISY-Reed Sump ManholeVISY-StickVISY-Stick AdvancedVISY-Stick Advanced BiodieselVISY-Stick Advanced E15VISY-Stick Advanced EthanolVISY-Stick BiodieselVISY-Stick E15VISY-Stick EthanolVISY-Stick FlexVISY-Stick Flex BiodieselVISY-Stick Flex E15VISY-Stick InterstitialVISY-Stick LPGVISY-Stick N for AdBlue urea solutionVISY-Stick Oil SeparatorVISY-Stick Sump DispenserVISY-Stick Sump Manhole
manualsdatabase
Your AI-powered manual search engine