3300 Series Grade 3 LeversetLatch Bolt Face Plate Change InstructionsI-LS02282Rev -, Rev Date: 3/28/18 Page 1 of 2Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.comPURPOSE: To illustrate how to change the face plate on the 3300 latch bolt.TOOLS: Flat Blade ScrewdriverNOTE: The latch bolt comes with the round corner face plate attached and square corner loose in the box.STEP 1 Carefully pry off the round corner face plate by inserting the flat blade of thescrewdriver between the mounting bracket and face plate in the location shownbelow.While holding the latch, twist the screwdriver to pry the face plate off the mountingbracket.Repeat Step on opposite side to free the face plate.

hager 3300 Series Instructions Manual