P29 Instruction Manual178.4 SettingsWith this menu item, you can adjust various parameters that affect the instrument’sbehaviour.The following sub-menu items are available:• Language• Output• Filter• Warning signal• Resolution• Zero-point calibration• CS (creep suppression)• Read factory settings• Code?8.4.1 LanguageThe menu language can be selected with this menu item. You can choose from the followinglanguages:• English• German• Italian• FrenchMake your choice with the “^” or ">" keys. Press Enter to confirm your selection.8.4.2 OutputWith this parameter, you can select the output and output range. You can choose from thefollowing options:• 4…20 mA• 0…20 mA• -5V…+5V• 0V…10V8.4.3 FilterThe measured pressure values can be smoothened by a filter before they reach the displayor analogue output. This parameter lets you set a time constant for this filter.8.4.4 Warning signalWith this parameter, the signal that a key has been pressed can be switched on or off.8.4.5 ResolutionThis parameter affects the display resolution. The display is changed according to theadjusted values. For example, if the setting is 1%, the display changes to showing themeasuring range in 1% jumps. This can be used with severely fluctuating pressures tosteady the display. However, this does not have any affect on the warnings.