halstrup-walcher PSE3**PN series Instruction Manual

Contents

halstrup-walcher PSE3**PN series Instruction Manual Manual pdf 6 page image

Instruction Manual PSx3xxPN6Solid shaft:The PSx3xxPN is mounted on the machine by fixing the solid shaft with coupling andintermediate flange to the axis of the machine.Never apply force to the housing cover, e.g., for supporting weight.Driving the PSx3xxPN rearward is prohibited (e.g. it’s not allowed to turn theoutput shaft by an external force).2.3 Pin assignmentFor the supply voltage either a Binder series 713/763 (A-coded) round, 5-pin plug forPSE and PSS devices or a 5-pin Harting plug with protective sleeve (HAN4A) for thePSE34xx devices is located in the housing cover of the PSx3xxPN.Two round 4-pin sockets, Binder series 825 (D-coded) are provided for connection tothe bus.Supply voltage connector:round plug Harting plug1. +24V motor2. ground (motor)3. +24V control unit4. ground (control unit)5. housing/pressure balance(external top view)To prevent the ingression of fluids into the PSW-housing duringcooldown, use a special cable with an airtube for pressure balancingof your PSWRound socket for bus:1. TD+ (WH/GN, white/green)2. RD+ (WH/OG, white/orange)3. TD- (GN, green)4. RD- (OG, orange)(external top view)Due to the use of 4-pin sockets, only four-wire cables should be used.Electrical grounding:Next to the connecting plugs there is a M4 stud bolt. It is recommended to connectthe positioning system with a cable as short as possible to the machine base. Theminimum wire cross section therefor is 1.5mm².