halstrup-walcher REG 21 Instruction Manual
                         | |
Contents
| 
Instruction Manual REG 21206.2.1 Notes on setting switching value parameters.Switching values can be entered as decimal figures; each place must be setindividually, proceeding as follows and beginning with the “function and parametercode” (see fig. 9):Press the enter key to open the parameter settings dialog (1).The current value is displayed; the numbers of the final decimal place will beflashing (2).Continue as follows until you have reached and set the +/- place:Press to set the flashing digit (or +/- sign) (3).Press the enter key to return to the decimal places (4).Press the enter key to complete the setting process (5).Press one of the set keys ( or ) to save the values (6).The instrument will display the function and parameter ID for the next parameter (7).Example: Setting the switch-on value for switching output 1Fig. 9The on and off values for each switch must have a min. difference of 2digits to make sure that the switching output will work correctly. For anunstable signal a larger difference will give better results.flashingmultiple timesflashingflashing flashingdisplaymultiple timessave(2)(4) flashing flashingflashing(3) (5) (6)(7)(1) (3) (4) (3) |
Related manuals for halstrup-walcher REG 21
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine