iDirect Evolution X3 Installation And Safety Manual

Also see for Evolution X3: Installation guide Installation guide

Contents

iDirect Evolution X3 Installation And Safety Manual Manual pdf 20 page image

12 iDirect Evolution X3 Satellite Router Installation and Safety ManualRF Specifications3.3 RF SpecificationsThe iDirect Evolution X3 Satellite Router RF specifications are presented in Table 5.Table 5 RF SpecificationsCategory DescriptionFrequency RangeTransmit:Receive:950-1700 MHz950-2150 MHzFrequency Tuning Step SizeTransmit:Receive:38 HzSub-Hertz with DemodulatorRF Power RangeTransmit:Receive:-35 dBm to +7 dBm-65 dBm to -5 dBm compositeRF Power AdjustabilityTransmit:Receive:0.5 dB Nominal Step SizeUnder AGC for all valid Rx input power rangeTypical Transmit and ReceivePhase Noise (dBc/Hz) at:Typical Phase Jitter at14 KHz to 1 MHz: ≤ 1.8° rmsTransmit Carrier Suppression ≥ 30 dBcDiscrete Spurs, harmonics andnon-harmonics≥ 50 dBc, with output ≥ -15 dBmModulator Spectral Shaping Intelsat: IESS-309, MIL-STD-188-165A section 5.1.6.4.1 SpectralConfinementTransmitter On/Off Ratio ≥ 50 dBc, with output power ≥ -15 dBmFrequency Phase Noise1 KHz -8310 KHz -83100 KHz -961 MHz -112