iDirect Satellite Router Installation and Commissioning Guide 75iDX Release 3.313 Setting Geo Location forSecure MobilesThis chapter describes how to enter the geographic location of a secure, mobile SatelliteRouter.This chapter includes the following sections:• “Secure Mobile Remotes” on page 75• “Setting Geographic Location using the Console” on page 76• “Setting Geographic Location of an X7” on page 76Note: This chapter describes a specific operational scenario for configuring SatelliteRouters as both Mobile and Secure. If commissioning a Satellite Router thatdoes not fall into this category, skip this chapter.Note: Evolution X1, X3, and e150 Satellite Routers cannot function as mobile or“itinerant” remotes.13.1 Secure Mobile RemotesA “secure mobile remote” is a mobile remote for which the Satellite Router’s geographiclocation has not been recorded by the Network Operator and is not displayed either by theNMS clients or by the remote commissioning and monitoring software. Secure mobile remotesare configured in iBuilder by selecting the Mobile Security option on the Remote GeoLocation tab.A secure mobile remote may be either a COTM mobile remote that moves across the footprintof the satellite beam or an “itinerant” remote that is periodically moved from fixed locationto fixed location.Once entered, secure geographic coordinates cannot be verified locally. Therefore it isimportant to exercise care when entering the data. The only sign that incorrect data for thesite has been entered will be failure of the Satellite Router to acquire the network. If indoubt, re-enter the information as soon as possible.WARNING! Geographic coordinates must accurately reflect the current geographiclocation. If the values are incorrect, the Satellite Router will not acquire thenetwork and may interfere with network operation.
