iHome iD45 Operation Instruction Manual
             | |
Unit does not turn on AC adaptor isn't plugged into a working wallsocket or not plugged into the power supplyjack on back of the unitPlug the AC adaptor into a working wall socket and plug the connectorinto the supply jack on the unitUnit requires a reset If unit is plugged in and doesn't respond, try resetting the unit byfollowing these steps:a) remove iPad/iPhone/iPod from dockb) unplug unit from power sourcec) remove back up batteryd) wait a few minutes, then restore battery and resume useiPad/iPhone/iPod is not docked properly Remove your iPad/iPhone/iPod from the dock and check for obstructionon the connectors in the dock and on your iPad/iPhone/iPod. Then reseatit in the dock.Battery Low iconalways flashing Battery is weak Replace with new batteryBattery was not installed properly Check to make sure the + side is facing outwardsiPad/iPhone/iPod doesnot respond to theunit, iPad/iPhone/iPodis playing but nosound comes outiPad/iPhone/iPod is not docked properly Remove your iPad/iPhone/iPod from the dock and check for obstructionon the connectors in the dock and on your iPad/iPhone/iPod. Then reseatit in the dock.Your iPad/iPhone/iPod software is too old Upgrade software on your iPad/iPhone/iPod via iTunes on yourcomputeriPad/iPhone/iPod is locked up/plays but nosound comes outCheck the volume setting. Make sure your iPad/iPhone/iPod is workingproperly before docking into the unit. Please refer to your iPad/iPhone/iPodmanual for details. See above for software upgrade information.You may need to reset your iPad/iPhone/iPod. Refer to your iPad, iPhoneor iPod user guide for details on how to perform a reset.Using 1st or 2nd generation iPod, iPod Shuffleor other devices. Unit cannot control those iPod models or other devices.iPad/iPhone/iPoddidn’t charge upiPad/iPhone/iPod is locked up/ frozeniPad/iPhone/iPod battery has problemPlease make sure your iPad/iPhone/iPod is working properly beforedocking into the unit. Please refer to your iPad/iPhone/iPod manual fordetails.Time sync didn’t work Older iPod models such as iPod mini do notsupport time sync functionMake sure you are using an iPhone or newer iPod such as touch,nano or classic. If not available, set time manually (see page 3).9TroubleshootingSolutionSymptom Possible ProblemNo sound from unit Volume is set too low on unit Make sure volume is turned upMove unit away from potential sources of external interference such ascomputers, modems, wireless devices (routers) or fluorescent light.Unit/iPad/iPhone/iPodperformance is erratic The unit is reacting to external interferenceUnit doesn’t respondP11iPad/iPhone/iPod is not docked properly Remove your iPad/iPhone/iPod from the dock and check for obstructionon the connectors in the dock and on your iPad/iPhone/iPod. Then reseatit in the dock. |
Related manuals for iHome iHome iD45
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine