iHome iH6 User Manual

Contents

iHome iH6 User Manual Manual pdf 8 page image

6_USB_new docks_ IB_8_11.fh10 12/19/06 9:19 AM Page 8When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operatinginstructions carefully before installation and use, and keep these instructions handy for future reference. Take specialnote of all warnings listed in these instructions and on the unit.1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,laundry tub, swimming pool or in a wet basement.2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation.For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow ofair through the ventilation openings.3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances(including amplifiers) that produce heat.4. Power Sources – The unit should be connected to a power supply only of the type described in the operatinginstructions or as marked on the appliance.5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on orpinched by items placed upon or against them. It is always best to have a clear area from where the cable exits theunit to where it is plugged into an AC socket.6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual forcleaning instructions.7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into anyopenings or vents located on the product.8. Attach ments – Do not use attachm ents not recommend ed b y the produ ct manufacturer.9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna orcable system during a lightning storm or when it is left unattended and unused for long periods of time. This willprevent damage to the product due to lightning and power-line surges.10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can resultin a risk of fire or electric shock.11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:A. the power supply cable or plug has been damaged.B. objects have fallen into or liquid has been spilled into the enclosure.C. the unit has been exposed to rain.D. the unit has been dropped or the enclosure damaged.E. the unit exhibits a marked change in performance or does not operate normally.12. Antenna – Do not connect an external antenna to the unit (other than that provided).13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, thepower cable should be unplugged from the unit to prevent damage or corrosion.14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operatinginstructions. Service methods not covered in the operating instructions should be referred to qualified servicepersonnel.Questions? Visit www.ihomeaudio.comA Consumer Guide to Product Safety6