jbc AD 2700 Instruction Manual

Contents

jbc AD 2700 Instruction Manual Manual pdf 2 page image

2210 cartridgesSee page 38 for rangeControl unitAD 2700 230V Ref. 2700200AD 2700 120V Ref. 27001002245 handpiece Ref. 2245000See page 40 for range2245 cartridges2210 handpiece Ref. 2210000AD 2700 Quick guideTOOLS: The AD 2700 allows connection of twotypes of soldering handpieces: the 2210 (20Wnominal power) and the 2245 (50W nominal power).Each one is to be used with their correspondingcartridge range.SETUP:1. Connect the power cord to the power socketat the back of the control unit and to the 230Vpowergrid. Switch on the station using themain switch.2. Connect your chosen handpiece to thehandpiece connector at the front of the controlunit.3. Select the desired temperature using the dial.TOOL'S STATUS:WORK: When the handpiece is out of its stand,the green LED "IN USE" is continuously on andthe tip is at working temperature.SLEEP: When the tool rests in its stand, the yellowLED "SLEEP" is continuosly on and the tooltemperature idles down to sleep.POWER CUT OFF: The green LED "IN USE"flashes when the tool rests in the cartridgeextractor, in this position the station stops heatingthe soldering tip.6. The station will now be ready for use within afew seconds.4. Put a cartridge inthe cartridge standand pick it up withthe handpiece.5. Secure the cartridgeby pushing thecartridge's tip intothe correspondingopening.Cartridgeextractor1ENGLISH