kinetic T-2400 Assembly Manual
Also see for T-2400: User manual
        | |
Contents | 
Page 5MOUNTING THE BIKE1. Remove thumb controller fromhandlebar2. Loosen the adjustment knobon the resistance unit to backthe roller away from the tireuntil it no longer touches.3. Reduce axle tension byloosening the right axle knoba minimum of two turns toallow for disengagement ofthe quick release.4. Firmly grasp your bike seatstay to stabilize the bike.5. Disengage the quick releaseon the right side of the trainerand slide the axle knob to thefully open position. The bikecan now be removed from theleft cone cup.REMOVINGTHE BIKETighten righttensioning knob onquick release side oftrainer until wheelis firmly centeredon resistance unitrollerTighten lockring when wheelis centered onresistance unit andbike is firmly lockedin at the skewer3TENSION KNOBSHIM PADSSHIM PADSAttach thumbcontroller tohandlebar usingproper rubber shimpad, tighten tensionknob64RIGHTSIDELEFT SIDEwww.kurtkinetic.comTurn roller tensionknob until rollertouches tire, thenadd 2 to 5 full turns5TIP: Test tirefriction by sharplymoving tire a1/4 turn backand forth. applyanother 1/2 turnon adjustmentknob if needed. |
Related manuals for kinetic T-2400
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine