l-com LC-SW805G User Manual
   | |
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845WWW.L-COM.COM E-MAIL: SALES@L-COM.COM PHONE: 1-800-343-1455 FAX: 1-978-689-9484© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.Hardware InstallationBefore installation The setup of the Switch can be performed using the following steps: Install the 5 or 8 Port DesktopGigabit Ethernet Switch in a fairly cool and dry place. See working environment for the acceptableoperation temperature and humidity ranges. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct sunlight. Leave at least 4 inches (10cm) of space at the left and right hand side of the Switch for ventilation. Visually inspect the DC power plug and make sure that it is fully secured to the DC power jack on the backof the unit. Make sure to securely plug in AC adaptor to an outlet with sufficient clearance so that the power cord isnot damaged by extreme bending. Do not stack any device on the Switch.Installation Desktop or Shelf InstallationWhen installing the Switch on a desktop or shelf, make sure that the rubber feet are present. These cushioningfeet can be found on the bottom at each corner of the device. Allow enough ventilation space between the deviceand the objects around it.TroubleshootingThe Power LED is not litCheck if the DC power cord is properly seated in the DC jack of the unit. Also make sure the AC Adapter is fullyseated in the power outlet you are using. Unplug and plug back in to the outlet or try another power outlet.The Link LED is not litCheck the cable connections. Make sure the plugs are fully seated in the jacks.Make sure the cable distance between the switch and other IEEE802.3 compatible network device does notexceed 100 meters.Performance is badMake sure the cable between the switch and other IEEE802.3 compatible network device is Category 5e UTPor better.Some devices can’t talk to other devices on the networkCheck status of the Link LEDs to make sure devices are linked.Reset the switch if needed. |
Related manuals for l-com LC-SW805G
manualsdatabase
Your AI-powered manual search engine