laerdal SimNewB Directions For Use Manual

Also see for SimNewB: User guide User guide Important product information

laerdal SimNewB Directions For Use Manual Manual pdf 7 page image

5ENGLISHI NTRODUCTIONC LINICALS IMULATIONR EMOTEC ONTROL PC U TILITIESD ETAILS PECIFICATIONST ROUBLE -SHOOTINGOverview of Control UnitA On/Off button and Indicator lightPress once to turn the Control Unit on.Press again to turn the Control Unit off.The indicator light is steady green if the Control Unit has con-tact with the Remote Control. If there is no contact with theRemote Control the indicator will blink green.If battery needs to be replaced, the indicator will blink,alternating between green and red.B DC power supply input: Used for stationary training and tolimit battery consumption.C Manikin Connector: Connects the Control Unit to the manikin.D Microphone input: External microphone attachment.E USB port: For connection to PC.F Remote Control connector: Used for direct connectionwith the Remote Control. RF communication is disabledwhen the units are connected via cable.G Blood Pressure connector: Connects the clear pneumatic tubefrom the manikin blood pressure connector.H Battery case: Holds 6 replaceable C-cell batteries.Overview of Remote ControlI LCD display: Displays status and operation information.J Quick Execution keys: Function keys. The function of eachkey is labeled on the display directly above the key.K Navigation keys: Use keys to navigate and select functionson the display.L OK / Select key: Use this key to activate selected functions.M Cancel / Back key: Go back from submenus without anychanges.N Numerical keys: Use these keys to enter numerical dataor to select numbered parameters.Can also be used as alphanumerical keys to enter file-and event-names.O Menu/Setup: Enter Setup Menu.P Scenario: Use this key to start a scenario.Q Shift key: Displays alternative quick execution functions.R On/Off key: Press once to turn the Remote Control on.Press again to turn the Remote Control off.S Remote Control connector: Used for direct connection withthe Control Unit.Use of the remote control with the SimNewB™ manikin is descri-bed in detail in section “Remote Control”.QPOJKLMNRIHGBC D E FAS ETUP G UIDESSimNewB.qxp:SimNewB DFU EN 3/25/08 4:23 PM Page 5