laerdal SimPad User Manual

Also see for SimPad: User guide Quick start guide Directions for use

Contents

laerdal SimPad User Manual Manual pdf 7 page image

Manikin Setup Manikin Setup12 13Connecting Multiple ManikinsIn BLS Instructor Mode multiple manikins can be connected. When operating multiplemanikins (2-6) it is recommended to use a router (Multi Manikin Router).NoteIn BLS Learner mode only one manikin can be selected. This happens automatically if themanikin is connected through the USB cable, or if only one manikin is available.Multi Manikin Router SetupIt is recommended to use the Laerdal Router (purchased separately) to establish network.Start up the router completely (approx. 2 minutes) before starting up SimPad and manikins.NoteDo not reset or change the router (i.e. password, configuration etc).Router switch(set to Router orAP, not Client)Reset button(do not use)Power connectorTo power the router, use theincluded USB power supply (5V)*To reboot, disconnect thepower supply for at least30 seconds, then reconnect.Edit Manikin NameWhen using manikin for the first time, it will have a default name (e.g Resusci AnneQCPR). To keep track of multiple manikins, label each with a unique name. This name willbe used to identify the manikin in the BLS Instructor Mode.312Turn on the Manikin(ensure it is in WiFi mode)Select BLS Instructor ModeTurn on SimPadFor optimal performance, placethe router above floor level.