lancer LP2 Superchiller Installation, Operation & Service Manual

lancer LP2 Superchiller Installation, Operation & Service Manual Manual pdf 27 page image

LP2 Superchiller 230V / 50Hzlancerbeverage.com Page 27 of 27Hoshizaki Lancer reserve the right to change specifications without notice. No 023b – 12 November 2012Images are for illustration purposes only as product may vary.16. Manufacturer’s ChecklistChecked by ...................................................................... Date ........................................................................Postmix Tested by .............................................................................................................................................Gas Charged by ................................................ Qty …………………….gramsIcebank Probe fitted ...................................................................Electrically tested by ................................................. Refrigeration tested by ................................................TAG No.............................................................Refrigeration system final check. Ensure evaporator fully frosts.Check all tube work for rubbing e.g. discharge line, liquid line and capillary.Condenser not touching divider panel or grille.Agitator blade tight and not touching coils cradle.Overflow pipe connected and tube positioned correctly.Drain plug fitted.All motors and pumps secured and mounted correctly.All pumps run quietly and carbonator pump switches O.K.Check icebank probe position and tightness.Carbonator and plumbing pressure tested. Check for leaks on pumps, clamps, welds, strainers,carbonator fittings and all joints.Coils in, fitted correctly and spaced.Plumbing and wiring strapped correctly and not touching the agitator. All open tubes capped.Tube labels on top of small lid.Superchiller sticker correctly positioned and straight.Foam insulator fitted to soda pump.Clean exterior of unit including power cord.Grilles correctly fitted, not touching any other component. Screws tight and earth connected.Agitator motor screw holes capped..Check body for sharp edges.Check lid for cleanliness and rough edges. Fit and secure.Check carbonator relief valve & backflow components plumbed correctly.Copy checklist and file, put manual/checklist in plastic bag with install kit and place in condenser area.W/O .......................................................................Affix label here

/ 27

Related manuals for lancer LP2 Superchiller