lavina 25-X User Manual

Also see for 25-X: User manual

lavina 25-X User Manual Manual pdf 5 page image

Superabrasive User Manual Original Language Lavina® 25‐X 3/201551. GENERAL INFORMATIONThis owner’s manual is intended for the operator of the Lavina® X machine, the servicing technician as well as for anyoneinvolved with operating or servicing the machine. We recommend that you read the instructions very carefully and follow themstrictly.The manual includes information about assembling, using, handling, adjusting and maintaining your Lavina® X floorgrinding andpolishing machine.MANUFACTURERSuperabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the stone and concrete industry. Today,Superabrasive is one of the world’s leading companies in the production of diamond tools and floor grinding machinery. AtSuperabrasive, we strive to deliver the very best solutions to our customers, and enable them to work more efficiently.GENERAL DESCRIPTIONThe Lavina® X machine is intended for grinding, polishing and buffing concrete, marble, granite, limestone, and terrazzo surfaceswith diamond tools.The Lavina® X machine is a three‐disc machine, which can be used dry as well as wet.For best results, use only tools manufactured or recommended by Superabrasive and its distributors. Additionally, the machinecould be used for grinding wood floor surfaces.The Lavina® X machine is manufactured and fitted for the above‐mentioned applications only! Every otheruse may possess risks to the persons involved.MACHINE CHARACTERISTICSThe Lavina® X machine is made of two main component sections:MAIN DESIGNThe two main component sections, are the carriage and main head.The handle (Fig.1.2) on the frame is adjustable in height and allows the operator to workina correct and safe working posture.The halogen spotlight (Fig.1.2) enables the operator to work in darker areas.Existing lighting system does not replace adequate overheadlighting.The controls are positioned on top of the electrical box (fig.1.3)The electrical box (fig.1.3) contains the electric switching devices and the inverter.The main feeding cable is connected with a plug and socket on top. The motor feedingcable is plugged into the socket located on the bottom of the box.The tank is on the opposite side of the frame, so that the weight of thewater has no influence on the operation of the machine. The frame weight, on the otherhand, is fully absorbed by the driving wheels. An electric pump sprays the water througha front sprayer or internal.The motor is mounted on the base plate and is driving the three heads with a beltsystem.The planetary head is driven by a simplex roller chain .ENVIRONMENTAL CONDITIONSThe temperature range for operating the Lavina® X machine outdoors is between 41°Fand 86°F or 5°C and 30°C. Never use the Lavina® X machine during rain or snow whenworking outdoors. When working indoors, always operate the machine in well‐ventilatedareas.ELECTRICAL CONNECTIONThe voltage (Volt) and power (Ampere) are displayed on a label on the electrical controlbox to avoid any incorrect connection. Refer to these before connecting the power. To avoid electrical shocks, make sure theground power supply is functioning properly.Figure 1.3Figure 1.2Figure 1.1