netvox R311G User Manual
Also see for R311G: User manual
         | |
55. Data ReportWhen the device is powered on and activated, it will immediately send a version package.Data will be reported once per hour by default setting.Maximum time: 3600sMinimum time: 3600sDefault reportchange:Battery ---- 0x01 (0.1V)Illuminance----0x32(50lux)Note: MinInterval is the sampling period for the Sensor. Sampling period >= MinInterval.he reported data is decoded by the Netvox LoRaWAN Application Command document and http://www.netvox.com.cn:8888/page/indexData report configuration and sending period are as following:Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1VMaxTime MaxTimeSleeping(MinTime) Sleeping(MinTime)Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BtteryVoltageChange value.Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.MaxTimeSleeping(MinTime) sleeping sleeping sleeping0H 15th M 30th M 45th M 1H 2HMin Interval(Unit:second)Max Interval(Unit:second)ReportableChangeCurrent Change≥Reportable ChangeCurrent Change ＜Reportable ChangeAny number between1~65535Any number between1~65535 Can not be 0. Reportper Min IntervalReportper Max IntervalWakes up andcollects data2.8VDoes not reportWakes up andcollects data2.8VDoes not reportWakes up andcollects data2.8VDoes not reportWakes up andcollects dataREPORTS2.8VWakes up and collectsdataREPORT 2.8VWake up and collects dataREPORTS 2.5VWakes up and collects dataREPORTS 2.7VWakes up and collects dataREPORTS 2.8V |
Related manuals for netvox R311G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine