netvox R718A User Manual

Also see for R718A: User manual User manual

Contents

netvox R718A User Manual Manual pdf 6 page image

54.4 Data ReportWhen the device is turned on, it will immediately send a version package and a data report oftemperature/humidity/voltage.The device sends data by default setting as below before any configuration.Temperature default report value: mintime = maxtime = 15 minutes, reportchange = 0x0064 (1 ℃),Humidity default report value: mintime = maxtime = 15 minutes, reportchange = 0x0064 (1%),Battery voltage default report value: mintime = maxtime = 15 minutes, reportchange = 0x01 (0.1V).Note: MinInterval is the sampling period for the Sensor. Sampling period >= MinInterval.Remarks:1. The device data sending cycle depends on the burning configuration before shipment.2. The interval between two reports must be the minimum time.Data report configuration and sending period are as following:5. Restore to Factory SettingR718A saves data including network key information, configuration information, etc. To restore tofactory setting, users need to execute below operations.1. Press and hold function key for 5 seconds till the green indicator flashes and then release; LEDflashes quickly 20 times.2. R718A will stay off mode by default setting after restoring to factory setting. Press function key toturn on R718A and to join a new LoRa network.Note: The device operation of turning off is the same as the device restore factory settings.6. Sleeping ModeR718A is designed to enter sleeping mode for power-saving in some situations:Min Interval(Unit:second)Max Interval(Unit:second)ReportableChangeCurrent Change≥Reportable ChangeCurrent Change ＜Reportable ChangeAny numberbetween 1~65535Any numberbetween 1~65535 Can not be 0. Reportper Min IntervalReportper Max Interval

/ 8

Related manuals for netvox R718A