netvox R718N3 User Manual

Also see for R718N3: User manual User manual User manual User manual

Contents

netvox R718N3 User Manual Manual pdf 6 page image

54.4 Data ReportWhen the device is turned on, it will immediately send a version package and a cluster report whichincludes battery voltage and three-phase current values.Data will be reported once per hour by default setting.Maximum time: 3600 secondsMinimum time: 3600 secondsDefault reportchange:Battery --- 0x01 (0.1V)Note:Data sending cycle is programmed by real configuration.The interval between two reports must be Min. Interval.Three-phase current detection:When the key is pressed, a report is sent immediately to return the current three-phase current value.Or it detects and returns current information when the time configuration is due.Data report configuration and sending period are as following:5. Restore to Factory SettingTo restore to factory setting, users need to execute below operations.1. Press and hold function key for 5 seconds till the green indicator flashes and then release; LEDflashes quickly 20 times.2. R718N3 is at off mode by default setting after restoring to factory setting.Note: “Turn off” operation and “Restore to Factory Setting” operation are the same.Min. Interval(Unit:second)Max. Interval(Unit:second)ReportableChangeCurrent Change≥Reportable ChangeCurrent Change ＜Reportable ChangeAny numberbetween 30~65535Any numberbetweenMin.~65535Can not be 0. Reportper Min. IntervalReportper Max. Interval

/ 8

Related manuals for netvox R718N3