nifty SD50 Series Operating/safety Instructions Manual

Also see for SD50 Series: Operating/safety instructions

nifty SD50 Series Operating/safety Instructions Manual Manual pdf 28 page image

SD SeriesOperating & Safety InstructionsUSA 03/16264.4 BASKET CONTROL OPERATIONNEVER START THE NIFTYLIFT IF YOU SMELL GASOLINE, LIQUIDPROPANE OR DIESEL. THESE FUELS ARE FLAMMABLE.BEFORE OPERATING THE NIFTYLIFT ENSURE THAT EACHOPERATOR HAS READ AND FULLY UNDERSTOOD THE OPERATINGMANUAL. FAILURE TO DO SO MAY RESULT IN DEATH OR SERIOUSINJURY.4.4.1 BASKET CONTROL INSTRUCTIONSALL MODELS1) Ensure all red emergency stops are out.2) Turn key switch at ground control station fully up to basket position.3) Ensure selector hand valve (if applicable) is turned to basket position, i.e. fully up4) Battery electric models go to step 11).DIESEL ENGINE OR Bl ENERGY MODELS ONLY5) For a cold engine start go to step 6) or for a warm engine start go to step 7).6) COLD ENGINE: - turn the engine ignition switch (on the basket control box) to the Glowposition (anti-clockwise). This engages the glow plug pre-heat system. Hold for 3-5 secondsthen turn the switch to the Start position (fully clockwise) and the engine will fire.7) WARM ENGINE: - - turn the main engine ignition switch (on the basket control box) to theStart position (clockwise) and the engine will fire.GASOLINE ENGINE OR GASOLINE/ELECTRIC MODELS ONLY8) For a cold engine start go to step 9) or for a warm engine start go to step 10).9) COLD ENGINE: - (From the ground only) turn the engine fuel tap on and engage the chokelever. Turn the main engine ignition through ON to ST (Start) and the engine will fire. Returnthe choke lever to its normal running position after the engine is started.10) WARM ENGINE: - Ensure the main engine ignition switch is ON. Turn the 3 position engineignition switch to the right and the engine will fire. When released, the selector will return tothe centre, ‘OFF’ position.ALL MODELS11) Depress foot switch or push and hold green power button.12) Select function and operate hand levers in full accordance with manufacturers Operating andSafety manual.13) When not in use return booms to stowed position. Fully raise and stow all outriggers. Turnkey switch at ground control to centre off position, remove key and chock wheels.