nilan Compact P Polar EK 3 kW CTS 700 Installation And Maintenance Manual

Also see for Compact P Polar EK 6 kW CTS 700: Software instructions Installation instructions Operating instructions User guide User manual

Contents

nilan Compact P Polar EK 3 kW CTS 700 Installation And Maintenance Manual Manual pdf 12 page image

We reserve the right to make changes Page 12 of 20Power supply Power supply including safety switch must be installed by an authorized electrician.The Comfort-unit must be connected according to the attached electrical chart.The unit is delivered with 3 m test cable for the CTS 700 panel. The panel should be connected tothe CTS 700 control in the unit with cable type cat 5e twisted in pairs. (Maximum length 20m).The CTS 700 panel must be placed dry and frost-proof. The panels’ integrated feeler prevents fur-ther cooling of the building if the primary heat-supply stops by stopping the ventilation if the panelfeeler gets below a specific value. (Factory setting is 10°C; the value can be set from 1-20°C.)Figure 7: CTS 700 controlIf a water heating element is installed in the system, the regulation vent must be connected electri-cally as described in the enclosed wiring diagrams.