nomad 900 Series Getting Started Manual
                                                           | |
Contents
| 
28Working with the CameraDepending upon the configuration of your unit, it may have anintegrated digital camera. If so, the protective cap on the top of theunit will have a clear window.Using the Camera:1. Press the key to launch the Pictures & Videos application.2. Tap on Camera.3. Press the key to focus the image.4. Press the Enter key to take a picture.5. Press the Enter key to close the picture preview.(Files are saved in File Explorer (under My Device) / MyDocuments / My Pictures.)NOTE: The camera preserves battery power by going into standbymode after 30 seconds of no camera usage. Tap the screen or press abutton to resume. The GPS will continue tracking satellites ifGeoTagging is turned on. Either ―Acquiring Satellites‖ or ―GPSReady‖ will be shown above the preview image when theviewfinder is not in standby.Managing Pictures:Tap the desired picture to make it full screen. Tap Menu to see thefollowing features:Zoom: A zoom window shows up in the lower right hand corner ofthe display. You can zoom in, zoom out or return to normalview (only on higher resolution pictures).Play Slide Show: Tap the display to see the icons to pause, advance,return to the last slide, or stop the slide show.Set as Today Background: Tap to place the selected picture as thebackground of the Today screen.Beam Picture: For use to beam to another Bluetooth device.Save: Saves the selected picture to a contact or a jpg.Edit: Puts a selected picture into an editable mode. To rotate thepicture 90 degrees, tap the left application key Rotate.Tap the right application key Menu to select the following:- Crop: Tap Crop and then drag the stylus on the screen toselect the area to be cropped.- Auto Correct: Automatically corrects the color in images. |
Related manuals for nomad 900 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine