norbar PTM-72 Series Operator's Handbook Manual

Contents

norbar PTM-72 Series Operator's Handbook Manual Manual pdf 16 page image

PAGE 14 OF 16ISSUE 109 2005SPECIFICATIONSRANGEMODEL MIN MAXMAXIMUMOVERLOADTOOL SPEED(FREE RUNNING AT MAX. AIR PRESSURE)1000Nm 200 N.m 1000 N.m 1100 N.m 125 r/min2000Nm 400 N.m 2000 N.m 2200 N.m 60 r/minRepeatability: ± 5%Air Supply: Maximum pressure – 6.3 bar (For maximum torque capacity).Recommended Lubrication: Shell Tellus 15 for the Lubro Control Unit.Temperature Range: 0°C to +50°C (operating). -20°C to +60°C (storage).Maximum Operating Humidity: 85% Relative Humidity @30°C.Case Materials / Finish: Handle: Aluminium casting with epoxy powder finish.Direction Gearbox: Aluminium with epoxy powder finish.Annulus: Alloy steel with nickel plate finish.Reaction Plate: Alloy steel with epoxy powder finish.TYPE MODEL WEIGHT DIMENSIONSForward (Clockwise) only 18072.F06 6.0 kg (13.4lb) 315mm x 75mm wide x 255mmBi-directional 18072.B06 6.2 kg (14.4lb) 360mm x 75mm wide x 255mmForward (Clockwise) only 18062.F08 6.3 kg (14.6lb) 345mm x 75mm wide x 255mmBi-directional 18062.B08 6.5 kg (15.0lb) 390mm x 75mm wide x 255mmMaximum Vibration at Handle: < 2.5m/s2Tested in accordance with ISO 8662-7 Hand Held portable tools –Measurement of vibrations at the handle.Sound Pressure Level: 83 dBA measured at 1m equivalent continuous A weighted sound.Tested to BS ISO 3744: 1994 Acoustics – Determination of sound powerlevels of noise sources using sound pressure – Engineering method inan essentially free field over a reflecting plane. Test conducted in freerunning condition with a supply pressure of 6.3 bar.Environment: Indoor use within a light industrial environment.Machinery Directive: In conformance with:BSEN 792-6:2000 Hand-held non-electric power tools.Safety requirements. Assembly power tools for threaded fasteners.Due to continuous improvement all specifications are subject to change without prior notice.

/ 18

Related manuals for norbar PTM-72 Series