oConnor C1243-0001 User Manual
                    | |
assembling the flags31 If required, turn the lock lever anti-clockwise to unlock the flag axle.Adjust the axle so the hollow knurled screws point upward.Turn the knurled screws anti-clockwise a few turns to slacken.Align the cutouts at the bottom of the flag with the screw threads,then push the flag into position and tighten the screws.A set of two side flags and two flag bracketsare available as optional accessories. Attach aflag bracket on either side of the sunshade;use a 2 mm Allen or hex key and secure thebracket with the six screws and two rectangularnuts supplied.Repeat the steps outlined above for thebottom/top flag also for the side flags(see step 1). Adjust each flag’s positionas desired, then tighten the lock leverfirmly to fix in position.2Adjust the angle of the flag as desired, then tighten the locklever clockwise to fix the flag in the desired position.12 |
Related manuals for oConnor C1243-0001
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine