olympia electronics BS-316 Installation & Operation Manual

Contents

olympia electronics BS-316 Installation & Operation Manual Manual pdf 3 page image

Page 3 from 22 921316000_09_016Operation instructionsThank you for purchasing this product of Olympia Electronics. A European manufacturer.This section contains general information and information regarding the use of the panel. All users of the panelshould read these instructions very carefully in order to be able to act in the event of an alarm or a fault condition.1.1 DescriptionThe BS-316 is a gas detection panel with 16 inputs. On each input it can be connected only one gas detector 4-20mA.1.2 Indications and ControlsThe panel incorporates one liquid crystal display (LCD) and a series of indication LEDs that informs the user aboutits status. The indication LEDs give general information (i.e. if an alarm becomes true, then the general alarmindicator LED will turned ON.) and on display appears information about each event ( i.e. Alarm sensor 1,thatmeans alarm from sensor 1) .Under the display there are 6 buttons for controlling the panel. On each button there is a number 1-6 andcorresponds to the functions left, right, up, down, enter, escape (exit or one step back). Generally by pushing abutton one action happens immediately or one menu appears with some functions. Inside the menu the buttons 1,2, 3, 4 operate as dimension buttons and we can move inside the menu, the button 5 (enter) to select and button 6(esc) to come back.During the next pages we will refer to the buttons using the corresponding numbers.All LEDs are grouped for easier indication. In detail the LEDs show the following:General Alarm(RED)General Fault(Yellow)General alarm indicator Lights in the event of aFaultDisable Point(Yellow)Power(Green)Lights to show a disabledinputsGeneral operation indicator ofthe panelTest(Yellow)Fault Battery(Yellow)Lights to show that weare in TEST modeLights to show a batteryproblemFigure 1: Main screen of BS-316