58 Using Your Device’s Phone FeaturesEnding a CallDo one of the following to end a call: Press Power/End . Select Hang Up. Press the headset button (if the headset is attached).Places the current call on hold.Lets you place another call while keeping the first call active. This buttonreplaces the Hold button when a call is on hold.Opens the Dial Pad so you can enter extra digits or dial another number.Dials any extra digits (such as a password or extension) that you assigned to aSpeed Dial favorite button. This button replaces the Dial Pad button duringoutbound calls to numbers that include pre-defined extra digits. See “Creating aSpeed Dial Favorite Button” on page 65 for details on creating a Speed Dialfavorite button.Mutes the Treo microphone so that you cannot be heard.Tip: To avoid accidentally pressing onscreen buttons while holding the device to your ear, youcan disable the screen’s touch-sensitive feature during active calls (see “Auto-Keyguardand Touchscreen Lockout” on page 140).Tip: When a call lasts longer than one minute, the screen turns off. Press any key exceptPower/End to wake up the screen, and then press Power/End to hang up the call. Becareful not to press Power/End to wake up the screen as this will accidentally end the call.
