qpcom QP-WR154N User Manual
Also see for QP-WR154N: User manual
                                          | |
Example two - fixed IP on the WANCompany ABC likes to establish a WLAN network to support mobile communication on all employees’Notebook PCs. MIS engineer collects information and plans the WLAN Broadband Router implemen-tation by the following configuration.WAN configuration:Fixed IPLAN configuration:WLAN configuration:1. Configure the WAN interface:Open WAN Interface Setup page, select Fixed IP then enter IP Address “192.168.2.254”, subnet mask“255.255.255.0”, Default gateway “192.168.2.10”.Press button to confirm the configuration setting.www.qpcom.com/www.qpcom.com.coThis page is used to configure the parameters for wireless LAN clients witch may connect to yourAccess Point. Here you may change wireless encryption settings as well as wireless network parameters.Wireless Basic SettingsBand:Mode:Network Type:SSID:Channel Width:ControlSideband:Channel Number:Broadcast SSID:WMM:Date Rate:Associated Clients:2.4 Ghz (B+G+N)AP40MHZUpperAutoEnabledEnabled11InfraestructureAPDisable Wireless LAN InterfaceShow Active ClientEnable Mac Clone (Single Ethernet Client)Enable Universal Repeater Mode (Acting as AP and client simultaneonly)SSID of Extended Interface:Apply Changes ResetIP Address 192.168.2.254Subnet Mask 255.255.255.0Default Gateway 192.168.2.10DNS Address 168.95.1.1IP Address 192.168.1.254Subnet Mask 255.255.255.0Default Gateway 192.168.2.254DHCP Client Range 192.168.1.100 – 192.168.1.200SSID APChannel Number 11Apply Changes |
Related manuals for qpcom QP-WR154N
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine