quadient IN-360 Series Quick Installation Manual

Also see for IN-360 Series: Product Replacement Guide User guide Quick installation guide User guide Quick installation guide

quadient IN-360 Series Quick Installation Manual Manual pdf 1 page image

Connect the Weighing Platform (e) connector into the COM PORTon the rear of the machine. Then connect the LAN Cable (f) andPower Cable (g) to either side of the machine.7Open the cover. Place the Meter (i) into the meter compartment andpush backwards until it slots into position. Close the cover.3Machine components:Machine BaseFeed Table withSealing Unit Catch Tray Weighing PlatformLAN Cable Power Cable MeterInkCartridgeUnpack all components from the box, remove packagingand any transit tape.1Lift machine slightly on the left hand side and align the hooks to attach the FeedTable (b) – align the catch tray to the right hand side of the machine (c).5Lower Weighing Platform release panel at rearof the machine. Place Weighing Platform (d) ontop of the machine and slide forward to lock. Liftpanel to secure and clip cable into place.Insert the Ink Cartridge (h) into the machine with the ‘TOP’ and ‘LOCK’stickers facing upwards. Push the Ink Cartridge (h) towards the back ofthe machine until you hear a ‘click’ - close the cover of the machine.Turn on the machine using the switch behind thePower Cable (g) and follow the steps on screen.8Select LAN and press ‘OK’ to test connection type.OKInstallation Process1 LAN9Obtain registration PIN from MyQuadient.Registration PINwww.myquadient.co.uk10IN-360 Series BaseQuick Installation Guide For more help with your installation, please visit: kb.quadient.co.uk/in360Lift the cover of the machine to reveal theInk Cartridge (h) and Meter (i) locations.264Press the button and credit the meter.CreditCredit available£100.00Amount of credit to add£1013Press OK to start the alignment test and pass a blank envelopethrough the machine, then choose the straightest line. Continueto follow the steps on screen to complete the installation.11A C E G I KB D F H J OKBackHeadset alignmentPerform an imprint testAdjust alignmentSelect the letter corresponding to the bestverticle lineB D F H JA C E G I K14Your machine is now ready to use. Please turn overfor your Quick User Guide.Remove tabs fromprint heads beforeinserting into unit!

/ 2

Related manuals for quadient IN-360 Series