Connect the weighing platform connector (e) into the COM PORTon the back of the machine. Then connect the LAN cable (f) andpower cable (g) to each side of the machine.7Open the cover. Place the meter (i) into the meter bay and slide in untilit fits securely into position. Close the cover.3Machine components:Machine BaseFeeding Table Catch Tray Weighing PlatformLAN Cable Power Cable MeterInkCartridgeUnpack all components from the box, remove packagingand any transit tape.1Lift machine slightly on the left hand side and align the hooks to attach the feedingtable (b) – attach the catch tray (c) to the right hand side of the machine.5Lower weighing platform release panel at the backof the machine. Place weighing platform (d) ontop of the machine and slide forward to lock. Liftpanel to secure and clip cable into place.Insert the ink cartridge (h) at an angle into the machine with the ‘TOP’ and‘LOCK’ stickers facing upwards. Push the ink cartridge (h) towards the backof the machine until you hear a ‘click’ - close the cover of the machine.Turn on the machine using the switch behind thepower cable (g) and follow the steps on screen.8Select LAN and press to test connectiontype.OKInstallation Process1 LAN9iX-3 Series BaseQuick Installation Guide For more help with your installation, please visit: kbhelp.quadient.com/ix3_install_en_dlLift the cover of the machine to reveal theink cartridge (h) and meter (i) bays.264Follow the steps on screen to complete theprocedureNextInstallation ProcessPress the ‘Next’ to start theOnline servicedeclaration.11MemMemBack of the machineWeighing PlatformCableOKInstallation ProcessEnter the registration PIN codeEnter the registration PIN code : 000001000000Mem