quadient IS-330 Quick Installation Manual

Also see for IS-330: Manual Installation guide Self-installation guide User guide Installation guide

quadient IS-330 Quick Installation Manual Manual pdf 1 page image

INSTALL THE HAND FEED TABLE AT THE LEFT OF THE BASE:fit the slots of the Base over the tabs of the table.CONNECT THE LAN to a network RJ45 plug of the Base andto the LAN wall socket using the LAN cable B .OPEN THE BASE COVER, remove the headset protectingstrips and insert the headset in its compartment, then pushthe headset back until it clicks.WRITE DOWN THE PSD number, you may need the numberlater.INSTALL THE PSD in the slot and then close the cover. CONNECT THE SYSTEM POWERPLUG. Follow the installation wizard on the screen. Refer to the installation section in the User Guide.IS-330/350 QUICK INSTALLATION GUIDEB CCAUTION: use a solid and steady table, farfrom any door or fan.2 47536CA1 Check the box contents.For more information about your mailingsystem, please visit :kb.quadient.us

/ 2

Related manuals for quadient IS-330