quadient IS-440 Quick Installation Manual

Also see for IS-440: Installation guide Installation guide Quick installation guide Quick installation guide Quick installation guide

quadient IS-440 Quick Installation Manual Manual pdf 1 page image

INSTALL AND CONNECT THE ELEMENTS: 1 Feeder (seerespective Quick Install Guides), 2 Base, 3 Catch tray.CONNECT THE LAN to a network RJ45 plug of the Base andto the LAN wall socket using the LAN cable B .OPEN THE BASE COVER, remove the headset protectingstrips and insert the headset in its compartment, then pushthe headset back until it clicks.WRITE DOWN THE PSD number, you may need the numberlater. INSTALL THE PSD in one of the slots and then close the cover. CONNECT THE SYSTEM POWERPLUG. Follow the installation wizard on the screen. Refer to the installation section in the User Guide.IS-440 QUICK INSTALLATION GUIDECAUTION: use a solid and steady table, farfrom any door or fan.748536231CB CA1 Check the box contents.2If included in your system, CONNECT THE SCALE (see itsQuick Install Guide).For more information about your mailingsystem, please visit:kb.quadient.ie/is440_ug

/ 2

Related manuals for quadient IS-440