quadient IS-480 Quick Installation Manual

Also see for IS-480: Quick installation guide Quick installation guide User guide User guide User guide

quadient IS-480 Quick Installation Manual Manual pdf 1 page image

INSTALL AND CONNECT THE ELEMENTS: 1 Feeder andoptional Dynamic Scale (see respective Quick Install Guides),2 Base, 3 Catch tray.If included in your system, CONNECT THE SCALE (see itsQuick Install Guide).OPEN THE BASE COVER, remove the headset protectingstrips and insert the headset in its compartment, then pushthe headset back until it clicks.WRITE DOWN THE PSD number, you may need the numberlater. INSTALL THE PSD in one of the slots and then close the cover.CONNECT THE SYSTEM POWERPLUG. Follow the installation wizard on the screen. Refer to the installation section in the UserGuide.IS-480 QUICK INSTALLATION GUIDECAUTION: use a solid and steady table, farfrom any door or fan.For more information about your mailingsystem, please visit:kbhelp.quadient.com/is480_dl748536231CB CA1 Check the box contents.2CONNECT THE LAN to a network RJ45 plug of the Base andto the LAN wall socket using the LAN cable B .

/ 2

Related manuals for quadient IS-480