quhwa VP-820A ID Instruction Manual
Also see for VP-720A ID: Instruction manual
            | |
8.Accessories9.Notices1. Do not install the indoor monitor at high temperature, high humidity placeor near TV.2. No touching the monitor screen with wet hands.3. Please use only soft cloth to clean the monitor screen or camera in orderto get a clear image.4. Please avoid throwing or hitting the units.5. Image could be illegible if the camera is shined by strong light.6. If you use internal wireless communication systems, image may be fuzzybecause of interference from radio waves.■ One indoor monitor ■ One outdoor camera■ One adapter ■ One bracket for indoor monitor■ 15M cable ■ Screws■ One adding card ■ One delete card■ One user cardfirst ID card will be adding card, and the second will be delete card.Fourthly, turn off the power, and let the jumper wire to be RUN condition. Thezone of the outdoor station accordingly. If there is a long ring sound afterthe second ID card touching, the re-setting is successful.be SET condition.Thirdly, turn on the power, and use two ID card to touch the ID card touchingSecondly, please turn off the power, and let the ID unlock PCB jumper wire toFirstly, open the back cover of outdoor station.Thirdly, use the delete card to touch the same area. Then the user card isdeleted successfully.9.3. The adding card and delete card are set well already. If the user loses theadding card or delete card, he or she can re-program a new setting by doingthe following steps:10 |
Related manuals for quhwa VP-720A ID
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine