ramia HB-CW Assembly Instructions Manual

ramia HB-CW Assembly Instructions Manual Manual pdf 1 page image

A-6pcs B1-4pcs B2-2pcs C-4pcs F-1pc 1pc10x40 mm 6x30 mm 6x40 mm 5x100 mmMontážní návod / Assembly Instructions HB-CWAttention:Parts Packing 1 Packing 24pcsENGProduct is made of high quality beech wood guaranteeing maximum resistance and long service life of the bench.Like all solid wood products it must not be left in areas of high humidity or damp that will cause natural movement.Recommended humidity level max. 60%.Product has NO TREATMENT. Please treat your the worktop with a varnish or oil before assembly including bottom of worktop.Don´t forget to repeat surface treatment each 6 months. This is especially important if situated in an unheated workshop , garage or outbilding.Varnish (oil) prevents absorption of surrounding moisture.Wood is a natural product, check and tighten all screws and bolts every 6 monhts.To increase stability, the worktop can be screwed to a table.WARNING!!! - In this case, the table top to which you will screw the worktop will be damaged!!!DateRamia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz

/ 2

Related manuals for ramia HB-CW