ramia HB-DIY1500 Assembly Instructions Manual

Also see for HB-DIY1500: Assembly instructions

ramia HB-DIY1500 Assembly Instructions Manual Manual pdf 1 page image

A1-38pcs B1-20pcs B2-8pcs B3-4pcs B4-4pcs C1-4pcs D1-4pcs D2-4pcs E-4pcs F-1pcs10x40 mm 7x60 mm 6x30 mm 6x40 mm 5x50 mm M12x100 M 12 M 12 M 12Assembly Instructions HB-DIY1500Sandpaperfor edgesabrading1pc 1pc2pcs 4pcsAllen keyAttention:Packing 1 Packing 2 DateWorkbench is made from high quality beech wood guaranteeing maximum resistance and long service life of thebench.Your workbench has NO TREATMENT. Please treat your bench with a varnish or oil within 3 months ofassembly.Don´t forget to repeat surface treatment each 6 months. This is especially important if situated in an unheatedworkshop , garage or outbilding.To increase the rigidity of your workbench ensure that you glue the joints and bolt the bench in possiton .Wood is and natural product, check and tighten all screws and bolts every six monhts.NOTICE: Like all solid wood products it must not be left in areas of high humidity or damp that will cause naturalmovement.PartsRamia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz