red lion 700 series Installation And User Manual

Contents

red lion 700 series Installation And User Manual Manual pdf 10 page image

REVISED 2016-01-191.1.2.2 TCP/IP Interface ObjectThe TCP/IP Interface object class (Class code = 0xF5) and instance attributes are implementedas defined by CIP Vol 2, 5-3 [2]. There is only one instance (1) of this object. The followingtable summarizes the attributes in the TCP/IP Interface object.Id Name Set Format Description1 Status DWORD (32) Interface status0 interface configurationattrib not configured1 interface configurationattrib is valid2 ConfigurationCapabilityDWORD (32) Interface capability flags. Bits:0 BOOTP client capable1 DNS client capable2 DHCP client capable3 DHCP-DNS updatecapable4 Configuration is settable5 Through bit 31 reserved3 ConfigurationControlSet DWORD (32) Interface control flags.Bits 0-3:0 use interface configurationpreviously stored1 get interface configurationvia BOOTP2 get interface configurationvia DHCP3 through 15 reservedBit 4=1 device shall resolve hostnames by querying a DNS server4 Physical LinkObjectSTRUCT of:Path Size UINT (16) Size of PathPath PaddedEPATHLogical segments identifying thephysical link object5 InterfaceConfigurationSTRUCT of:IP Address Set UDINT (32) The device’s IP address.Network Mask Set UDINT (32) The device’s network maskGatewayAddressSet UDINT (32) Default gateway addressName Server Set UDINT (32) Primary name serverName Server 2 Set UDINT (32) Secondary name serverDomain Name Set STRING Default domain name6 Host Name Set STRING Host nameN-Tron® Series 700/7000 Switch CIP™ Manual -5-