red lion N-Tron 302MC Hardware Manual

Contents

red lion N-Tron 302MC Hardware Manual Manual pdf 17 page image

N-Tron® 300 Series Hardware Guide 2-7Installation Revised 2015-12-04DIN-Rail MountingInstall the unit in a standard DIN-Rail. Recess the unit to allow at least 5” of horizontal clearance for fiber opticcable bend radius (2” for TX models).To install the unit to 35mm industrial DIN-Rail,place the top edge of the included mountingbracket on the back of the unit against the DIN-Rail at a 15° angle as shown. Rotate the bot-tom of the unit to the back (away from you)until it snaps into place.To remove the unit from the 35mm industrial DIN-Rail, place a flat head screwdriver into the orangerelease clip found at the bottom of the unit, and applydownward force on the clip until it disengages fromthe bottom of the unit from the DIN-Rail. Rotate thebottom of the unit towards you and up at an approxi-mate 15° upward angle to completely remove theunit.All N-Tron 300 series products are designed to be mounted on industry standard 35mm DIN-Rail.However, DIN-Rail mounting may not be suitable for all applications. We offer three alternativemounting solutions: the 300 Panel Mount Assembly (P/N: 300-PM), the 900 Panel Mount Assembly(P/N: 900-PM), and the Universal Rack Mount Kit (P/N: URMK). These may be used to securelymount 302MC, 304TX, 305FX, 306FX2, 306TX, and 308TX units to a panel or standard 19" rack.300-PM 900-PM URMK