Inside US: +1 (877) 432-9908 Quick Start GuideOutside US: +1 (717) 767-6511 RAM® Serieswww.redlion.net Drawing No. LP1061-A-1-RAM® 6021M12 RouterUnpacking Instructions1. Unpack the Red Lion unit and verify the following components are enclosed in the package:• Quick Start Guide• RAM-6021M12 Router2. The RAM-6021M12 is powered by two redundant power inputs located on a single 5-pinM12 A-coded connector.• The router requires a power source rated between 8 and 49 VDC3. Connect to the WAN or LAN port for network connectivity.Item DescriptionInput Voltage Power 8 to 49 VDCSteady Input Current 0.15A @ 24VDCBTU/hr 12.25Inrush Current 33.9A/0.0287ms @ 24VDCAccessing the Web User Interface using AutoNet1. Connect the RAM-6021M12 router to an existing network.a. Connect an Ethernet cable between the router and yourlocal corporate LAN or directly to your PC/Laptop.b. Verify the green LED on the Ethernet port is lit.2. RAM-6021M12 will obtain its IP address via DHCP if aDHCP server is present, if not the Ethernet interface will seta static IP and enable a DHCP server on the interface. Ifyour PC is connected directly to the Red Lion router it willobtain a local IP address from the router.3. Access Web User InterfaceOpen a web browser and navigate to http://ram-Ethernet MAC Address>:Example: http://ram-6d3f11.local/Accessing the Web User Interface (Traditional Method)1. Connect the PC to the RAM-6021M12 router.a. Connect an Ethernet cable between the local PC and anyavailable Ethernet port.2. Setup PC IP Address.PC to Ethernet InterfacesSelect “Use the following IP address” and fill in the blankfields with the information below:3. Access Web User InterfaceOpen a web browser and enter the following in the addressbar:• WAN/ETH0: http://192.168.0.1:10000/• LAN/ETH1: http://192.168.1.1:10000/Login Instructions• User Name: admin (lowercase letters)• Password: last six digits of the unit’s serial numberUpon successfully logging in, the web UI will launch.Note: For security purposes, it is recommended that theadmin password be changed according to your internalpolicies.To change password, go to: AdminAccess Settings.If you have any problems getting connected, please refer tothe Red Lion Software Manual located at:http://www.redlion.netWeb UI:Item WAN/ETH0 LAN/ETH1IP Address 192.168.0.2 192.168.1.2Subnet Mask 255.255.255.0 255.255.255.0Default Gateway 192.168.0.1 192.168.1.1Preferred DNS 192.168.0.1 192.168.1.1