Össur i-digits Component Assembly Manual

Also see for i-digits: User quick reference guide Clinician manual Technical manual

Contents

8 of 252.0 Transfer of Alignment2.1 Thumb AlignmentThe use of the Thumb Alignment Plate is to aid the positionof the Thumb Mounting Plate (fig. 10).Screw the thumb alignment plate onto the index positionKnuckle Mounting Plate using three M2x5 mm screws.Depending on the handedness, attach the thumb rotationassembly to the correct side of the alignment plate (fig. 11)using three M2x5 mm screws.2.2 Knuckle DummiesSingle knuckle dummies are used to aid transfer of align-ment. Attach the Single Knuckle Dummies to the KnuckleMounting Plate using three M2x16 mm Countersunk TorxScrew and the T6 Screwdriver (fig. 12).Fig. 10:Left handRight handFig. 11:Fig. 12: