u-blox EVK-M8BZOE User Manual
                                 | |
Contents
| 
EVK-M8BZOE User GuideUBX-17053592 - R03 Early Production Information Getting StartedPage 9 of 333 Getting Started3.1 Software installationInstallation of the EVK-M8BZOE software and documentation requires internet access.Download and install the u-center GNSS evaluation software from the u-blox website athttps://www.u-blox.com/en/product/u-center-windows.Once the zip file is downloaded, unzip it and double-click the extracted exe file. The u-center software will beinstalled on your system and placed under the “u-blox” folder in the “Start Programs” menu.Windows drivers for the Silicon Labs CP210x USB to UART Bridge of the EVK are available from Microsoft WindowsUpdate service. The Windows system driver search mechanism can download and install the USB driversautomatically from Microsoft Windows Update service. If the automatic install fails, or if the PC already has an oldversion of the drivers installed, the correct version of the driver can be downloaded and installed manually fromSilicon Labs at http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx.Please make sure you select the driver version which does not include “Serial Enumeration” functionality.3.2 Hardware installationThis section describes the evaluation board connectors and configuration settings that are required to get started.Figure 1 shows an overview of EVK-M8BZOE board and its connectors.Figure 1: Getting started overview |
Related manuals for u-blox EVK-M8BZOE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine