vacuubrand ME 2 NT Instructions For Use Manual

Also see for MD 4 NT VARIO: Instructions for use Instructions for use

vacuubrand ME 2 NT Instructions For Use Manual Manual pdf 14 page image

page 14 of 67Keep a minimum distance of 8 in (20 cm) between thecooling fan and surrounding items (e.g., housing, walls,etc.). Check fan regularly for dust/dirt. Clean fan guardgrill if necessary to avoid a reduction of ventilation.Use only hoses at the inlet and outlet of the pump withan inner diameter at least as large as the diameter of thepump’s tubing (to avoid overpressure at the outlet, andreduction of pumping speed at the inlet).Allow the equipment to equilibrate to ambient temperatureif you bring it from cold environment into a room prior tooperation. Notice if there is water condensation on coldsurfaces.Comply with all applicable and relevant safety require-ments (regulations and guidelines). Implement the re-quired actions and adopt suitable safety measures.Ambient conditions➨ Do not reach for this product if it has fallen into liquid.There is a risk of deadly electrical shock. Unplug thesystem immediately.+ Do not use this product in an area where it can fall orbe pulled into water or other liquids.+ Pay attention to the maximum permissible ambientand gas inlet temperatures (see “Technical data”, pg.24).• Adopt suitable measures in case of differences fromrecommended conditions, e.g., using the equipmentoutdoors, installation in altitudes of more than 6500 ft(2000 m) above mean sea level, conductive pollution orexternal condensation on the pump.• Do not operate this product near flames.NOTICE